SIZE117 cm (46.0")
RESOLUTION1920 x 1080 (16:9 aspect ratio)
DISPLAY COLORS16.77 million
The DuraVision DV4624's large screen provides ample space for viewing important nautical information from one or more bridge system applications in a single location. Images are displayed pixel-by-pixel in full high definition (1920 × 1080) to provide operators with vivid picture for precise observation.
Backlight brightness, gamma, and RGB color settings are calibrated at the factory so each monitor achieves accurate color reproduction for meeting the highly specialized requirements of ECDIS systems. The monitor meets IEC 61174, IEC 62288, and IEC 62388 international standards for ECDIS and RADAR applications.
The monitor offers reliability for use in harsh maritime environments, complying with the conditions for temperature, humidity, and vibration as defined in the IEC 60945 international standard for maritime navigation and radio communication equipment and systems. IP55 rating ensures it can withstand dust ingress and is protected against low-pressure water jets. The monitor uses stainless steel industrial-grade housing for durability.
The monitor comes equipped with hardware calibration functionality using the optional EIZO EACAL-R01 luminance meter. Easily accessed through the OSD menu, calibration of the backlight brightness, gamma, and white point can be carried out in just minutes. No additional software is needed, ensuring calibration operation is non-intrusive to your system.
DVI and D-Sub inputs offer compatibility with PCs equipped with digital or analog graphics boards. Composite video (CVBS) that supports NTSC, PAL, and SECAM is also included for displaying radar images or video surveillance. It also comes equipped with a wide range of communication interfaces - RS232, RS485, USB, Ethernet, and Modbus.
The monitor is equipped with an LED backlight that lasts longer and consumes less power compared to conventional CCFL backlights. It is also mercury-free for minimal impact on the environment.
Picture-in-Picture (PiP) functionality allows operators to display a small separate screen from a second signal source within the monitor to effectively view a variety of navigational information.
The wide dimming range of up to 600 cd/m2 (ECDIS certified dimming range: 0.5 - 400 cd/m2) allows controllers to adjust to the appropriate brightness level for viewing during the day or at night.
The VA panel features wide viewing angles of 178° that minimize changes in contrast and gradation to maintain excellent visibility when the screen is viewed from the side.
|Model Variations||Without Stand|
|Size||46.0" / 117 cm|
|Native Resolution||1920 x 1080 (16:9 aspect ratio)|
|Viewable Image Size (H x V)||1018.0 x 572.7 mm|
|Pixel Pitch||0.530 x 0.530 mm (Minimum viewing distance: 1.8 m)|
|Grayscale Tones||256 tones|
|Display Colors||16.77 million|
|Viewing Angles (H / V, typical)||178°, 178°|
|Brightness (typical)||600 cd/m2 , (ECDIS-certified dimming: 400 cd/m2.)|
|Contrast Ratio (typical)||4000:1|
|Response Time (typical)||6.5 ms (Gray to Gray)|
|Input Terminals||DVI-I 29 pin x 1, DVI-D 24 pin x 1, VGA HD-D-Sub15 pin x 1, CVBS (BNC) x 1|
|Digital Scanning Frequency (H / V)||15 - 100 kHz, 50 - 100 Hz (Max. Dotclk: 155 MHz)|
|Analog Scanning Frequency (H / V)||15 - 100 kHz, 50 - 100 Hz (Max. Dotclk: 155 MHz)|
|Sync Formats||Separate, Composite, Sync on Green|
|Video Input Format||NTSC, PAL, SECAM|
|Function||1 port for communication|
|Power Requirements||AC 100 - 240 V , 50 / 60 Hz , DC 18 -36 V|
|Maximum Power Consumption||AC 110 W, DC 100 W (Brightness Max.)|
|Typical Power Consumption||AC 35 W, DC 30 W (Brightness 80 cd/m2)|
|Power Save Mode||Less than 16 W (AC input) , Less than 10 W (DC input)|
|Standby Mode||AC 4 W, DC 2 W|
|Power Management||Power Save (VESA DPMS)|
|Features & Functions|
|Preset Modes||Color Mode (Custom, Day, Dusk, Night)|
|OSD Languages||English, German, Spanish, French|
|Communication Interface||RS232C, RS485, USB, Ethernet, OSD port|
|Communication Protocol||Modbus, SNMP, EIZO proprietary|
|Dimensions (Without Stand, W x H x D)||1,067 x 622.5 x 89.6 mm|
|Net Weight (Without Stand)||31 kg / 68.3 lbs|
|Operating Temperature||-15 - 55 °C|
|Operating Humidity (R.H., non condensing)||- 95 %|
|Storage Temperature||-20 - 70 °C|
|Degree of Protection||IP55 (front) , IP20 (Rear)|
|Certifications & Standards (Please contact EIZO for the latest information.)||IEC60945, RoHS, REACH, IEC61174, IEC62288, IEC62388|
|Supplied Accessories (May vary by country. Please contact EIZO for details.)||Setup manual, connectors for RS485, DC-Power and keyboard interface|